Package contents:

Vivaldi Wideband Antenna 400–6000 MHz (Vivaldi)

Specifications:

Frequency range: 730 MHz – 6.5 GHz
Polarization mode: Linear polarization
Nominal gain: 7 dBi
The R101C antenna’s gain increases gradually with frequency: approximately 5 dBi at 800 MHz, 7 dBi at 2.4 GHz, and 9 dBi at 5.8 GHz.
Power: 5 W
Directivity:The R101C provides good directionality and low side lobes. It can be used as a direction-finding antenna.
- Horizontal beamwidth (–3 dB): approx. 60°
- Vertical beamwidth (–3 dB): approx. 40°
Dimensions: 23 × 22.5 cm
Connector type: SMA-F
Weight: 150 g
Temperature range: –45 ℃ to +80 ℃
Humidity: 0% – 95% (short-term exposure to 100% allowed; avoid direct water exposure)
Water resistance: after immersion, the antenna must be dried and the connection cable replaced
Wind resistance: for safety reasons, do not use if wind speed exceeds 20 m/s (wind level 8)

Antenna Extension (4 m Cable)

A 4 m low-loss 50 Ω RF coaxial cable with high-quality SMA male connectors on both ends, supplied with an antenna clamp.
Designed for use with the TinySA Ultra external antenna.

SLL-240 Cable Construction:

The SLL-240 low-loss coaxial cable provides excellent shielding and minimal attenuation. These properties are achieved using a
foam dielectric and dual shielding design.

Electrical Characteristics of SLL-240 Cable: