“BORYSLAV 6.12” Wideband Analogue Video Detector

“BORYSLAV 6.12” is a passive wideband analogue video detector designed to detect and analyse video transmissions used by UAVs and FPV drones across the 6–11.5 GHz frequency range.

The system passively monitors the RF spectrum, automatically scans the entire operating range and identifies the frequency of detected analogue video signals. Intercepted video can be viewed in real time through a secure web interface, allowing the operator to assess both the signal frequency and the transmitted video feed remotely.

With a stated detection range of at least 12 km under specified line-of-sight conditions and a full-range scan time of no more than 60 seconds, “BORYSLAV 6.12” extends passive UAV detection into higher-frequency bands.

The detector can operate as a standalone system or as a detection component within a wider electronic warfare (EW) architecture. Power and data are carried over a single Ethernet cable using PoE, simplifying deployment and allowing the antenna unit to be installed away from the operator.

Key Capabilities

• Passive detection of analogue UAV and FPV video transmissions
• Wide frequency coverage from 6 to 11.5 GHz
• Detection range of at least 12 km under specified conditions
• Full-range scanning in no more than 60 seconds
• Automatic identification of the detected video transmitter frequency
• Real-time demodulation and interception of analogue video feeds
• Remote video monitoring through a secure web interface
• Remote system configuration and control
• Continuous operation for at least 24 hours
• Standalone deployment or integration with wider EW systems

Detection Performance

Parameter	Specification
Frequency range	6–11.5 GHz
Detection range	≥12 km*
Full-range scan time	≤60 s
Receiver sensitivity	≤−90 dBm
Antenna type	Vivaldi
Number of antenna modules	1
VSWR at antenna connector	≤2.5

*Detection range specified for a 3 W UAV video transmitter under direct radio line-of-sight conditions. Actual range may vary depending on transmitter power, target altitude, terrain, antenna placement, signal characteristics, interference and the local RF environment.

Power & Operating Specifications

Parameter	Specification
Power supply	48 V PoE
Operating voltage	48 V ±10%
Power consumption	≤12 W with a 30 m Ethernet cable
Continuous operation	≥24 hours
Operating temperature	−20°C to +50°C
Protection rating	IP65

Dimensions & Weight

Parameter	Specification
Antenna and electronics unit with bracket	≤2 kg
Unit dimensions	≤450 × 170 × 200 mm
Packaged weight	≤12 kg
Packaged dimensions	≤700 × 500 × 400 mm

Applications

“BORYSLAV 6.12” is designed for:

• Detection of UAVs and FPV drones using high-frequency analogue video links
• Monitoring RF activity across the 6–11.5 GHz spectrum
• Identification of frequencies used by UAV video transmitters
• Protection of fixed positions, facilities and designated areas
• Remote monitoring of deployed positions
• Integration into electronic warfare systems as a passive detection component

High-Frequency FPV Detection

“BORYSLAV 6.12” extends passive analogue video detection into the 6–11.5 GHz range, allowing operators to identify video links operating above the frequency coverage of conventional FPV detection systems.

Once a signal is detected, the system identifies its operating frequency and demodulates the analogue video feed, providing the operator with additional information for threat assessment and response.

This makes “BORYSLAV 6.12” particularly suitable for environments where UAV operators use less common or higher-frequency video transmission bands.

Passive Operation

“BORYSLAV 6.12” operates passively and does not transmit RF signals while searching for UAV video links. This reduces the system’s electromagnetic signature and allows it to monitor RF activity without actively revealing its position.

Remote access also allows the antenna and electronics unit to be positioned away from the operator while system configuration and intercepted video remain accessible through the web interface.

Fast Deployment with PoE

Power and data are transmitted through a single 30 m Ethernet cable using 48 V PoE. This reduces the number of cables required at the deployment point and simplifies installation.

The antenna and electronics unit weighs no more than 2 kg including the mounting bracket, making it suitable for installation on masts and other elevated mounting points.

An IP65-rated enclosure protects the unit against dust and water jets, supporting operation in demanding field environments.

Standalone or Integrated Deployment

“BORYSLAV 6.12” can operate as a standalone passive detection system or as part of a wider electronic warfare architecture.

Information about the detected frequency and intercepted video feed can support subsequent threat assessment and the selection of appropriate electronic countermeasures.

Within a combined detect-and-counter workflow, the detector provides early information about an active UAV video link without generating RF interference itself.

Key Advantages

• 6–11.5 GHz frequency coverage for detection of high-frequency analogue UAV video links
• Passive detection with no RF transmission during monitoring
• Detection range of at least 12 km under specified conditions
• Complete frequency-range scan in ≤60 seconds
• Real-time interception and display of detected video feeds
• Automatic identification of the video transmitter frequency
• Secure remote access through a web interface
• IP65 protection for field deployment
• Power and data over a single Ethernet cable
• Compact antenna unit weighing no more than 2 kg with mounting bracket

What’s Included

What’s Included

Looking for High-Frequency FPV Drone Detection?

Tell us about your operating environment, required detection range and target frequency bands. The InLab team can help assess whether “BORYSLAV 6.12” meets your requirements and advise on deployment and integration with other detection and electronic warfare systems.

Email: service@inlab.kyiv.ua
WhatsApp: +380967096708